Peroxy TBPB

TBPB

Product description

　 Tert-Butyl Peroxybenzoate

　 Active Oxygen content : 8.0%
　 CAS No. : 614-45-9

Specification

Appearance :                   clear liquid
     Assay :                           98.0% min.
　 Color :                            100 Pt-Co max.
　 tert-Butyl hydroperoxide : 1000 mg/kg max.
　 Inorganic + organic hydrolyzable chloride : 50 mg/kg max.

Physical properties

Density, 20℃ :                1040 kg/m3
  Viscosity, 20℃ :              6 mPa.s
Freezing point :              approx. 8℃

Packaging

Standard packaging size for TBPB is 25 kg net.
Smaller packaging size is available on request.

Application

1. Polymerization of styrene

TBPB can be used for the polymerization and copolymerization of styrene in the temperature range of 100-140℃.

During polymerization the temperature is increased in steps.

2. Polymerization of acrylates and methacrylates

TBPB can be used as initiator for the solution (co)polymerization of acrylates and methacrylates in the temperatures range of 100-170℃,

amongst others for the coatings.TBPB can also be applied as an initiator for the bulk and suspension (co)polymerization of acrylates and methacrylates.

3. Polymerization of ethylene

TBPB is an efficient initiator for the ethylene polymerization under high pressure in both autoclave and tubular processes.To obtain a wide spectrum of polymerization temperatures, combinations with other peroxides are applied in practice. Depending on reaction conditions.

TBPB is active in the temperature range of 220-270℃.

4. Other applications

TBPB can also be used for the (co)polymerization of acrylonitrile and vinyl acetate.

5. Crosslinking Peroxides

TBPB,is suitable for crosslinking of EPDM rubber compounds at ambient temperature within some weeks.Rubber compounds containing TBPB have moderate processing safety in combination with a very high speed of cure.

6. Peroxides for Thermoset Resins

TBPB, tert-butyl peroxybenzoate, is an aromatic perester, which is used for the curing of unsaturated polyester resins at elevated temperatures.

TBPB is preferred for the curing of UP resin based Hot Press Moulding formulations (SMC, BMC, ZMC etc) in the temperature range of 120 - 170℃.

Please send mail to info@mceitchem.com